{"title":"BMW G83 M4","description":"\u003cp\u003eExplore Clubsport Garage products currently associated with the BMW G83 M4 Convertible. Compatibility may vary by model year, specification and product variant; verify the fitment details for your exact vehicle before ordering.\u003c\/p\u003e","products":[{"product_id":"eventuri-carbon-fibre-intake-system-v2-bmw-g87-m2-g80-g81-m3-g82-g83-m4-coupe-convertible-cs-csl","title":"Eventuri Carbon Fibre Intake System V2 - BMW G87 M2 | G80 | G81 M3 | G82 | G83 M4 Coupe | Convertible CS | CSL","description":"\u003cp\u003e\u003cspan\u003eThe \u003c\/span\u003e\u003cstrong\u003e\u003cspan\u003eEventuri Carbon Fibre Intake System for the BMW G8X M2, M3, M4, CS and CSL\u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003e is a complete high-performance intake upgrade designed to improve airflow, reduce pressure loss and support both stock and high-powered S58 builds.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eDeveloped through intensive R\u0026amp;D, the Eventuri system is a full redesign from the airboxes through to the turbo inlets. The aim is to increase flow rate, keep inlet temperatures low and reduce restriction, allowing the turbos to draw air more efficiently with less resistance.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eUsing the available engine bay space, Eventuri has developed two custom filters with up to \u003c\/span\u003e\u003cstrong\u003e\u003cspan\u003e40% larger filtration area\u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003e than stock. These sit inside Eventuri’s patented \u003c\/span\u003e\u003cstrong\u003e\u003cspan\u003ecarbon fibre Venturi housings\u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003e, creating a smooth, aerodynamically efficient airflow path from the filters to the turbos.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThe turbo inlets are increased by up to \u003c\/span\u003e\u003cstrong\u003e\u003cspan\u003e160% in cross-sectional area\u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003e compared with stock and feature an advanced dimpled inner surface to help reduce frictional losses. This allows airflow to move through the inlets at higher flow rates with reduced pressure loss, helping reduce wastegate duty cycle and increase overall performance.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eOn a stock tune, Eventuri states performance gains of approximately \u003c\/span\u003e\u003cstrong\u003e\u003cspan\u003e13–18hp\u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003e and \u003c\/span\u003e\u003cstrong\u003e\u003cspan\u003e12–16ft-lb\u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003e.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eFurther information below.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2\u003e\u003c\/h2\u003e\n\u003ch2\u003e\u003c\/h2\u003e","brand":"Eventuri","offers":[{"title":"Gloss","offer_id":53622652010872,"sku":"EVE-G8XMV2-CF-INT-1","price":2784.0,"currency_code":"GBP","in_stock":true},{"title":"Matte","offer_id":53622652043640,"sku":"EVE-G8XMV2-CFM-INT","price":2784.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0276\/7375\/5750\/files\/eventuri-carbon-fibre-intake-system-v2-bmw-g87-m2-g80-g81-m3-g82-g83-m4-coupe-convertible-cs-csl-9054363.webp?v=1762961600"},{"product_id":"eventuri-carbon-fibre-engine-cover-bmw-g80-g81-m3-g82-g83-m4-coupe-convertible-g87-m2","title":"Eventuri Carbon Fibre Engine Cover - BMW G80 | G81 M3 | G82 | G83 M4 Coupe | Convertible | G87 M2","description":"\u003cp\u003e\u003cspan\u003eThe \u003c\/span\u003e\u003cstrong\u003e\u003cspan\u003eEventuri Carbon Fibre Engine Cover\u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003e is a premium engine bay upgrade for the \u003c\/span\u003e\u003cstrong\u003e\u003cspan\u003eBMW G80 M3\u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003e, \u003c\/span\u003e\u003cstrong\u003e\u003cspan\u003eG82\/G83 M4\u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003e and \u003c\/span\u003e\u003cstrong\u003e\u003cspan\u003eG87 M2\u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003e, designed to give the S58 engine bay a more complete, balanced and high-end appearance.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThe factory engine cover can leave the engine bay looking unfinished, so Eventuri redesigned the cover to bring improved symmetry and a more refined visual finish. The cover extends across the charge-cooler area while retaining sufficient heat dissipation through added venting.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eCrafted from \u003c\/span\u003e\u003cstrong\u003e\u003cspan\u003eprepreg carbon fibre\u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003e, the Eventuri engine cover offers a lightweight, premium-quality finish and is designed as a direct replacement using the \u003c\/span\u003e\u003cstrong\u003e\u003cspan\u003eOEM mounting points\u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003e. It pairs perfectly with the Eventuri intake system, which is available separately.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eFurther information below.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2\u003e\u003c\/h2\u003e","brand":"Eventuri","offers":[{"title":"Gloss","offer_id":53622655582584,"sku":"EVE-G8XM-CF-ENG-1","price":984.0,"currency_code":"GBP","in_stock":true},{"title":"Matte","offer_id":53622655615352,"sku":"EVE-G8XM-CFM-ENG","price":984.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0276\/7375\/5750\/files\/eventuri-carbon-fibre-engine-cover-bmw-g80-g81-m3-g82-g83-m4-coupe-convertible-g87-m2-6394733.jpg?v=1762961605"},{"product_id":"eibach-pro-kit-performance-lowering-springs-for-bmw-g82-g83-m4-2021","title":"Eibach Pro-Kit Performance Lowering Springs for BMW G82 and G83 M4 (2020+)","description":"\u003cp\u003e\u003cspan\u003eThe \u003c\/span\u003e\u003cstrong\u003e\u003cspan\u003eEibach Pro-Kit Lowering Springs\u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003e are a precision-engineered suspension upgrade for the \u003c\/span\u003e\u003cstrong\u003e\u003cspan\u003eBMW G82 M4\u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003e and \u003c\/span\u003e\u003cstrong\u003e\u003cspan\u003eBMW G83 M4 Convertible\u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003e, designed to improve stance, handling and chassis response while retaining everyday usability.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eFor the \u003c\/span\u003e\u003cstrong\u003e\u003cspan\u003eBMW G82 M4\u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003e, the Pro-Kit lowers the car by approximately \u003c\/span\u003e\u003cstrong\u003e\u003cspan\u003e20mm at the front\u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003e and \u003c\/span\u003e\u003cstrong\u003e\u003cspan\u003e20mm at the rear\u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003e, reducing arch gap and lowering the centre of gravity for a sharper, more aggressive look. For the \u003c\/span\u003e\u003cstrong\u003e\u003cspan\u003eBMW G83 M4 Convertible\u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003e, the kit lowers the front by approximately \u003c\/span\u003e\u003cstrong\u003e\u003cspan\u003e25–30mm\u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003e and the rear by approximately \u003c\/span\u003e\u003cstrong\u003e\u003cspan\u003e25mm\u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003e.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eUsing \u003c\/span\u003e\u003cstrong\u003e\u003cspan\u003eprogressive spring rates\u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003e, the Eibach Pro-Kit improves body control and handling response without making the car unnecessarily harsh. It is ideal for owners looking for a trusted direct-fit spring upgrade suitable for daily driving, spirited road use and fast road setups.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eManufactured in Germany to \u003c\/span\u003e\u003cstrong\u003e\u003cspan\u003eTÜV-approved standards\u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003e, Eibach Pro-Kit springs are extensively road and track tested and remain one of the most recognised and trusted spring upgrades in the performance aftermarket.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eFurther information below.\u003c\/span\u003e\u003cspan\u003e\u003c\/span\u003e\u003c\/p\u003e","brand":"Eibach","offers":[{"title":"Default Title","offer_id":55173338202488,"sku":"E10-20-049-01-22","price":330.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0276\/7375\/5750\/files\/eibach-pro-kit-performance-lowering-springs-for-bmw-f20-f22-m135i-m235i-m140i-m240i-3904979.webp?v=1762961299"},{"product_id":"automotive-passion-carbon-gloss-black-arch-guards-for-bmw-g82-m4","title":"Automotive Passion Carbon \/ Gloss Black Arch Guards for BMW G82 \u0026 G83 M4","description":"\u003cp\u003eProtect your BMW’s paintwork while enhancing its appearance with these Automotive Passion Arch Guard kits (Front \u0026amp; Rear), available in stunning\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003ecarbon fibre\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eor high-gloss black finishes. Designed specifically for the BMW G82 G83 M4, these discreet yet functional accessories help shield your cars's side and rear arches from stone chips, road debris, and dirt build-up - a common issue for wider-arched performance cars.\u003c\/p\u003e\n\u003cp\u003ePerfect for both daily drivers and track-focused builds, these arch guards offer a clean, factory-like fitment that complements the aggressive styling of the M4.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFurther information below.\u003c\/strong\u003e\u003c\/p\u003e","brand":"Automotive Passion","offers":[{"title":"Carbon \/ No","offer_id":55180880380280,"sku":"APG82G83M4CN","price":119.0,"currency_code":"GBP","in_stock":true},{"title":"Carbon \/ Yes","offer_id":55180847841656,"sku":"APG82G83M4CY","price":135.0,"currency_code":"GBP","in_stock":true},{"title":"Gloss Black \/ No","offer_id":55180880347512,"sku":"APG82G83M4GN","price":71.0,"currency_code":"GBP","in_stock":true},{"title":"Gloss Black \/ Yes","offer_id":55180847808888,"sku":"APG82G83M4GY","price":87.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0276\/7375\/5750\/files\/automotive-passion-carbon-black-front-arch-guards-for-porsche-911macantaycan-3734384.webp?v=1762961447"},{"product_id":"bmw-g80-g81-m3-g82-g83-m4-pre-preg-carbon-fibre-diffuser-outline-trim-by-tre-2021","title":"BMW G80 G81 M3 \u0026 G82 G83 M4 Pre-Preg Carbon Fibre Diffuser Outline Trim by TRE (2021+)","description":"\u003cp\u003eThe \u003cmeta charset=\"utf-8\"\u003e\u003cspan\u003eBMW G80 M3 or G82 M4 \u003c\/span\u003e\u003cstrong\u003ePre-Preg\u003cspan\u003e \u003c\/span\u003eCarbon Fibre\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eDiffuser Outline Trim by TRE (2021+) is a AutoID product developed for the listed vehicle application. It is suited to performance road, track day and Clubsport use where correct fitment, reliability and consistent performance are important.\u003c\/p\u003e\n\u003cp\u003eDesigned as an exterior upgrade, the component gives the vehicle a more purposeful appearance while supporting the requirements of track-focused and enthusiast builds. Careful installation is recommended to achieve correct alignment and a secure fit.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFurther information below.\u003c\/strong\u003e\u003c\/p\u003e","brand":"AutoID","offers":[{"title":"Default Title","offer_id":55190909550968,"sku":"TR-BG8XDOTCF","price":479.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0276\/7375\/5750\/files\/bmw-g80-g81-m3-g82-g83-m4-pre-preg-carbon-fibre-diffuser-outline-trim-by-tre-2021-4427870.webp?v=1762961452"},{"product_id":"tre-pr-1-pre-preg-carbon-fibre-performance-front-splitter-for-bmw-g80-m3-g82-g83-m4","title":"TRE PR-1 Pre-preg Carbon Fibre Performance Front Splitter for BMW G80 M3 \u0026 G82 G83 M4","description":"\u003cp data-start=\"354\" data-end=\"544\"\u003eThe\u003cstrong data-start=\"358\" data-end=\"401\"\u003e TRE GT V2 Pre-Preg carbon fibre Front Splitter\u003c\/strong\u003e for the \u003cstrong data-start=\"410\" data-end=\"436\"\u003eBMW G80 \u0026amp; G82 M4 \u003c\/strong\u003eis the perfect option for those seeking an aggressive look. This splitter was designed specifically by TRE in England and features a 2x2 carbon fibre weave.\u003c\/p\u003e","brand":"AutoID","offers":[{"title":"Default Title","offer_id":55412029456760,"sku":"TR-BG8XPRFSCF","price":1199.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0276\/7375\/5750\/files\/tre-pr-1-pre-preg-carbon-fibre-performance-front-splitter-for-bmw-g80-m3-g82-g83-m4-8573205.webp?v=1768041370"},{"product_id":"mmx-high-capacity-baffled-differential-sump-oil-pan-bmw-g8x","title":"MMX High-Capacity Baffled Differential Sump – BMW G8X M2, M3 \u0026 M4","description":"\u003cp\u003eThe MMX High-Capacity Baffled Differential Sump is a direct-replacement differential oil pan for BMW G8X M2, M3 and M4 models, including rear-wheel-drive and xDrive applications. Designed for sustained high-load use, it increases differential oil capacity by up to 2 litres and incorporates an internal windage tray to help maintain lubrication of the gears and pinion.\u003c\/p\u003e\u003cp\u003eInternal and external cooling fins provide additional surface area for heat dissipation. The sump is machined from 6061-T6 billet aluminium and includes an additional -8AN connection with an M22-to--8AN adaptor for a supplementary differential oil-cooling arrangement. It uses the factory mounting points without modification and is designed to work alongside the MMX G8X dual differential mount, sold separately.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003e\u003cem\u003eFurther information below.\u003c\/em\u003e\u003c\/strong\u003e\u003c\/p\u003e","brand":"MMX Performance","offers":[{"title":"Default Title","offer_id":55514599129464,"sku":"MMR55-1600","price":1439.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0276\/7375\/5750\/files\/mmx-high-capacity-baffled-differential-sumpoil-pan-bmw-g8x-6064957.jpg?v=1774670111"},{"product_id":"mmx-differential-heat-shields-bmw-g8x","title":"MMX Driveshaft Heat Shields (Pair) – BMW G8X M2, M3 \u0026 M4","description":"\u003cp\u003eThe MMX Driveshaft Heat Shields are designed to reduce radiant heat exposure around the rear driveshaft CV joint gaiters on BMW G8X M2, M3 and M4 models. High temperatures during sustained circuit use can contribute to deterioration of the factory rubber boots, potentially leading to grease loss and accelerated CV joint wear.\u003c\/p\u003e\u003cp\u003eSupplied as a pair, the shields provide a physical thermal barrier around this vulnerable area of the rear drivetrain. They are particularly relevant to cars used regularly on track or fitted with aftermarket exhaust systems where heat management around the differential and output shafts is important.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003e\u003cem\u003eFurther information below.\u003c\/em\u003e\u003c\/strong\u003e\u003c\/p\u003e","brand":"MMX Performance","offers":[{"title":"Default Title","offer_id":55514599653752,"sku":"MMR55-1607","price":215.98,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0276\/7375\/5750\/files\/mmx-differential-heat-shields-bmw-g8x-1406973.jpg?v=1774670110"},{"product_id":"mmx-performance-oil-filter-housing-for-bmw-g8x","title":"MMX Billet Oil Filter Housing – BMW S58","description":"\u003cp\u003eThe MMX billet oil filter housing replaces the factory plastic housing cap on BMW S58 engines. It is designed to address cracked or leaking plastic filter housings while retaining the original engine oil filtration arrangement.\u003c\/p\u003e\u003cp\u003eThe housing is machined from 6061 aluminium and finished in black anodising. An integrated pressure-control bypass removes the need to transfer the factory plastic bypass valve, and MMX supplies a replacement factory-specification O-ring. The housing can be fitted during a routine oil and filter change.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003e\u003cem\u003eFurther information below.\u003c\/em\u003e\u003c\/strong\u003e\u003c\/p\u003e","brand":"MMX Performance","offers":[{"title":"Default Title","offer_id":55531278926200,"sku":"MMR17-1601","price":121.79,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0276\/7375\/5750\/files\/mmx-performance-oil-filter-housing-for-bmw-g8x-1262493.jpg?v=1776244573"},{"product_id":"xc3-engineering-bmw-f8x-rear-camber-lockout-shims","title":"XC3 Engineering Rear Camber Lockout Shims – BMW F8X \u0026 G8X M2, M3 \u0026 M4","description":"\u003cp\u003eThe XC3 Engineering rear camber lockout kit uses fixed shims in place of the factory eccentric adjustment hardware, providing a positive locating arrangement for cars where rear camber is set using appropriate adjustable suspension components.\u003c\/p\u003e\u003cp\u003eThe shims are laser cut from 5mm stainless steel, engraved and supplied with replacement 10.9-grade hardware. SKU XC3-CS-002 is designed for BMW F8X and G8X M2, M3 and M4 applications.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003e\u003cem\u003eFurther information below.\u003c\/em\u003e\u003c\/strong\u003e\u003c\/p\u003e","brand":"XC3 Engineering","offers":[{"title":"Default Title","offer_id":55555373465976,"sku":"XC3-CS-002","price":54.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0276\/7375\/5750\/files\/xc3-engineering-bmw-f8x-g8x-rear-camber-lockout-kit-3232869.webp?v=1778647523"},{"product_id":"xc3-engineering-bmw-f8x-g8x-rear-toe-lockout-kit","title":"XC3 Engineering Rear Toe Lockout Shims – BMW F8X \u0026 G8X M2, M3 \u0026 M4","description":"\u003cp\u003eThe XC3 Engineering rear toe lockout kit replaces the factory eccentric toe-adjustment hardware with fixed shims, providing a positive locating arrangement for cars where rear toe is set using appropriate adjustable suspension components.\u003c\/p\u003e\u003cp\u003eThe shims are laser cut from 4mm stainless steel, engraved and supplied with upgraded 12.9-grade replacement hardware. SKU XC3-TS-001 is designed for BMW F8X and G8X M2, M3 and M4 applications.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003e\u003cem\u003eFurther information below.\u003c\/em\u003e\u003c\/strong\u003e\u003c\/p\u003e","brand":"XC3 Engineering","offers":[{"title":"Default Title","offer_id":55555373891960,"sku":"XC3-TS-001","price":45.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0276\/7375\/5750\/files\/xc3-engineering-bmw-f8x-g8x-rear-toe-lockout-kit-8922841.webp?v=1778647523"},{"product_id":"mmx-front-differential-lift-mount-bmw-f8x-g8x-m2-m3-m4","title":"MMX Front Differential Lift Mount – BMW F8X \u0026 G8X M2, M3 \u0026 M4","description":"\u003cp\u003eMMX Front Differential Lift Mount – BMW F8X \u0026amp; G8X M2, M3 \u0026amp; M4\u003c\/p\u003e\u003cdiv\u003e\n\u003cp\u003eThe MMX Front Differential Lift Mount \/ Cradle (MMR55-1604) is engineered for the BMW F8x and G8x M2, M3 and M4. Fitted on its own in the OEM position it reduces drivetrain movement under load, on road or track. \u003cstrong\u003ePaired with the MMX Rear Diff Raised Poly Bush, it raises the differential by 10mm, correcting driveshaft geometry on lowered vehicles and reducing heat and premature wear on the axle shafts.\u003c\/strong\u003e Precision machined from 6061-T6 billet aluminium, it's a direct replacement requiring no modification.\u003c\/p\u003e\n\u003cp\u003eIf you already run the MMX High Capacity Diff Sump (MMR55-1600 for G8x, MMR55-1000 for F8x) and\/or the MMX Dual Differential Mount (MMR55-1606 for G8x, MMR55-1001 for F8x), the Front Differential Lift Mount \/ Cradle is the natural next step to complete the setup.\u003c\/p\u003e\n\u003c\/div\u003e\u003cp\u003e\u003cstrong\u003e\u003cem\u003eFurther information below.\u003c\/em\u003e\u003c\/strong\u003e\u003c\/p\u003e","brand":"MMX Performance","offers":[{"title":"Default","offer_id":55695101428088,"sku":"MMR55-1604","price":695.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0276\/7375\/5750\/files\/mmx-front-differential-lift-mount-bmw-f8x-g8x-m2-m3-m4-9129428.png?v=1791627269"},{"product_id":"mmx-adjustable-rear-toe-arms-bmw-f8x-g8x-m2-m3-m4","title":"MMX Adjustable Rear Toe Arms – BMW F8X \u0026 G8X M2, M3 \u0026 M4","description":"\u003cp\u003eMMX Adjustable Rear Toe Arms – BMW F8X \u0026amp; G8X M2, M3 \u0026amp; M4\u003c\/p\u003e\u003cp\u003eThe MMX Adjustable Toe Arms are a billet 6061-T6 aluminium suspension upgrade for BMW G8x and F8x M2, M3, and M4 models. Using pillow bush rod-ends in place of the OEM rubber bushes, they hold consistent rear toe under hard driving, reducing tyre wear and sharpening chassis response. Fully reversible with no modifications required, they suit both stock and lowered cars, though lowered vehicles will see reduced toe adjustment range and increased minimum camber.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003e\u003cem\u003eFurther information below.\u003c\/em\u003e\u003c\/strong\u003e\u003c\/p\u003e","brand":"MMX Performance","offers":[{"title":"Default","offer_id":55695101460856,"sku":"MMR55-1609","price":360.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0276\/7375\/5750\/files\/mmx-adjustable-rear-toe-arms-bmw-f8x-g8x-m2-m3-m4-7125262.png?v=1791627270"},{"product_id":"mmx-oem-camber-arm-bearing-pair-bmw-f8x-g8x-m2-m3-m4","title":"MMX OEM Camber Arm Bearing Pair – BMW F8X \u0026 G8X M2, M3 \u0026 M4","description":"\u003cp\u003eMMX OEM Camber Arm Bearing Pair – BMW F8X \u0026amp; G8X M2, M3 \u0026amp; M4\u003c\/p\u003e\u003cp\u003eMMX OEM Camber Arm Bearing for BMW G8x \u0026amp; F8x M2, M3 and M4 replaces the factory rubber bush with a machined 6061-T6 aluminium pillow bush design, eliminating deflection for consistent rear camber under load. The result is sharper chassis response and reduced tyre wear, in a direct OEM-fit upgrade built for road and track.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003e\u003cem\u003eFurther information below.\u003c\/em\u003e\u003c\/strong\u003e\u003c\/p\u003e","brand":"MMX Performance","offers":[{"title":"Default","offer_id":55695101493624,"sku":"MMR55-1651","price":150.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0276\/7375\/5750\/files\/mmx-oem-camber-arm-bearing-pair-bmw-f8x-g8x-m2-m3-m4-6940122.png?v=1791627270"},{"product_id":"mmx-oem-toe-traction-arm-bearing-pair-bmw-f8x-g8x-m2-m3-m4","title":"MMX OEM Toe\/Traction Arm Bearing Pair – BMW F8X \u0026 G8X M2, M3 \u0026 M4","description":"\u003cp\u003eMMX OEM Toe\/Traction Arm Bearing Pair – BMW F8X \u0026amp; G8X M2, M3 \u0026amp; M4\u003c\/p\u003e\u003cp\u003eMMX OEM Toe\/Traction Arm Bearing for BMW G8x \u0026amp; F8x M2, M3 and M4 replaces the factory rubber bush with a machined 6061-T6 aluminium pillow bush design, eliminating deflection for consistent rear toe under load. The result is sharper chassis response and reduced tyre wear, in a direct OEM-fit upgrade built for road and track.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003e\u003cem\u003eFurther information below.\u003c\/em\u003e\u003c\/strong\u003e\u003c\/p\u003e","brand":"MMX Performance","offers":[{"title":"Default","offer_id":55695101526392,"sku":"MMR55-1650","price":198.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0276\/7375\/5750\/files\/mmx-oem-toetraction-arm-bearing-pair-bmw-f8x-g8x-m2-m3-m4-9558803.png?v=1791627249"},{"product_id":"mmx-4-point-differential-lift-kit-bmw-g8x-m2-m3-m4","title":"MMX 4-Point Differential Lift Kit – BMW G8X M2, M3 \u0026 M4","description":"\u003cp\u003eMMX 4-Point Differential Lift Kit – BMW G8X M2, M3 \u0026amp; M4\u003c\/p\u003e\u003cp\u003eThe MMX 4-Point Differential Lift Kit (MMR55-0002) bundles the Front Differential Lift Mount \/ Cradle (MMR55-1604), the Dual Differential Mount (MMR55-1606) and two Rear Diff Raised Poly Bushes (MMR55-1605) for the BMW G8x M2, M3 and M4, RWD and AWD. Fitted at OEM height it locks down the differential at four points, or set to Lifted it raises the whole diff by 10mm, correcting driveshaft geometry on lowered vehicles and reducing heat and premature wear on the axle shafts. Four points, matched together, ready to fit.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThis kit contains 1 x MMX Front Differential Lift Mount \/ Cradle (MMR55-1604), 1 x MMX Dual Differential Mount (MMR55-1606) and 2 x MMX Rear Diff Raised Poly Bush (MMR55-1605).\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003e\u003cem\u003eFurther information below.\u003c\/em\u003e\u003c\/strong\u003e\u003c\/p\u003e","brand":"MMX Performance","offers":[{"title":"Default","offer_id":55695102050680,"sku":"MMR55-0002","price":1334.35,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0276\/7375\/5750\/files\/mmx-4-point-differential-lift-kit-bmw-g8x-m2-m3-m4-7613948.png?v=1791627235"},{"product_id":"mmx-3-point-differential-lift-kit-bmw-g8x-m2-m3-m4","title":"MMX 3-Point Differential Lift Kit – BMW G8X M2, M3 \u0026 M4","description":"\u003cp\u003eMMX 3-Point Differential Lift Kit – BMW G8X M2, M3 \u0026amp; M4\u003c\/p\u003e\u003cp\u003eThe MMX 3-Point Differential Lift Kit (MMR55-0001) bundles the Front Differential Lift Mount \/ Cradle (MMR55-1604) and the Rear Diff Raised Poly Bush (MMR55-1605) for the BMW G8x M2, M3 and M4, RWD and AWD. Fitted at OEM height it reduces drivetrain movement under load, or set to Lifted it raises the diff by 10mm, correcting driveshaft geometry on lowered vehicles and reducing heat and premature wear on the axle shafts. Two parts, matched together, ready to fit.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThis kit contains 1 x MMX Front Differential Lift Mount \/ Cradle (MMR55-1604) and 1 x MMX Rear Diff Raised Poly Bush (MMR55-1605).\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003e\u003cem\u003eFurther information below.\u003c\/em\u003e\u003c\/strong\u003e\u003c\/p\u003e","brand":"MMX Performance","offers":[{"title":"Default","offer_id":55695102083448,"sku":"MMR55-0001","price":805.18,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0276\/7375\/5750\/files\/mmx-3-point-differential-lift-kit-bmw-g8x-m2-m3-m4-3515665.png?v=1791627228"},{"product_id":"mmx-rear-differential-raised-poly-bush-bmw-g8x-m2-m3-m4","title":"MMX Rear Differential Raised Poly Bush – BMW G8X M2, M3 \u0026 M4","description":"\u003cp\u003eMMX Rear Differential Raised Poly Bush – BMW G8X M2, M3 \u0026amp; M4\u003c\/p\u003e\u003cdiv\u003e\n\u003cdiv role=\"feed\"\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e\n\u003cdiv role=\"article\" tabindex=\"0\"\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e\n\u003cp dir=\"ltr\"\u003eThe MMX Rear Diff Raised Poly Bush is a two-position bush for the BMW G8x M2, M3 and M4, replacing the factory rear differential mounting bush. The centre section can be set to OEM height or +10mm Lifted, correcting driveshaft geometry on lowered vehicles and reducing heat and premature wear on the axle shafts. Used alongside the MMX Front Differential Lift Mount \/ Cradle (MMR55-1604) for the 3-point setup, and with a second bush and the MMX Dual Differential Mount (MMR55-1606) for the full 4-point setup.\u003c\/p\u003e\n\u003cdiv\u003e\n\u003cdiv role=\"feed\"\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e\n\u003cdiv role=\"article\" tabindex=\"0\"\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eIf you already run the MMX High Capacity Diff Sump (MMR55-1600) and the MMX Dual Differential Mount (MMR55-1606), the Front Differential Lift Mount \/ Cradle (MMR55-1604) and a second Rear Diff Raised Poly Bush complete the ultimate 4-point setup.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eInstallation of the raised bush for the 3-point setup requires a BMW 33177852488 bolt. Bushes are sold individually, purchase two for the 4-point setup.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\u003cp\u003e\u003cstrong\u003e\u003cem\u003eFurther information below.\u003c\/em\u003e\u003c\/strong\u003e\u003c\/p\u003e","brand":"MMX Performance","offers":[{"title":"Default","offer_id":55695102116216,"sku":"MMR55-1605","price":109.19,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0276\/7375\/5750\/files\/mmx-rear-differential-raised-poly-bush-bmw-g8x-m2-m3-m4-5829324.png?v=1791627236"},{"product_id":"mmx-rear-differential-mount-bush-bmw-g8x-m2-m3-m4","title":"MMX Rear Differential Mount Bush – BMW G8X M2, M3 \u0026 M4","description":"\u003cp\u003eMMX Rear Differential Mount Bush – BMW G8X M2, M3 \u0026amp; M4\u003c\/p\u003e\u003cp\u003eThe MMX Rear Diff Mount Bush (MMR55-1603) is a direct replacement for the factory rear differential mounting bush on the G8x and F8x M2, M3 and M4. Manufactured from 80A durometer grey polyurethane with a black anodised 6061-T6 aluminium sleeve, it reduces movement under load and answers the differential mount failures common on these chassis. A second bush can be added alongside the MMX Dual Differential Mount (MMR55-1606) for a second point of support.\u003cbr\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003e\u003cem\u003eFurther information below.\u003c\/em\u003e\u003c\/strong\u003e\u003c\/p\u003e","brand":"MMX Performance","offers":[{"title":"Default","offer_id":55695102148984,"sku":"MMR55-1603","price":99.59,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0276\/7375\/5750\/files\/mmx-rear-differential-mount-bush-bmw-g8x-m2-m3-m4-2440332.png?v=1791627231"},{"product_id":"mmx-underbody-chassis-brace-bmw-g8x-m3-m4","title":"MMX Underbody Chassis Brace – BMW G8X M3 \u0026 M4","description":"\u003cp\u003eMMX Underbody Chassis Brace – BMW G8X M3 \u0026amp; M4\u003c\/p\u003e\u003cp class=\"p1\"\u003eThe MMX Underbody Chassis Brace is a direct replacement for the factory brace on the BMW G8x M3 and M4, engineered to provide an additional 15mm of exhaust clearance whilst maintaining original ground clearance. Precision machined from billet 6061-T6 aluminium, it also adds chassis stiffness for improved dynamic performance, with no modifications required for installation.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003e\u003cem\u003eFurther information below.\u003c\/em\u003e\u003c\/strong\u003e\u003c\/p\u003e","brand":"MMX Performance","offers":[{"title":"Default","offer_id":55695102181752,"sku":"MMR13-1601","price":299.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0276\/7375\/5750\/files\/mmx-underbody-chassis-brace-bmw-g8x-m3-m4-6073550.png?v=1791627227"},{"product_id":"mmx-engine-oil-cooler-guard-bmw-g8x-m2-m3-m4","title":"MMX Engine Oil Cooler Guard – BMW G8X M2, M3 \u0026 M4","description":"\u003cp\u003eMMX Engine Oil Cooler Guard – BMW G8X M2, M3 \u0026amp; M4\u003c\/p\u003e\u003cp class=\"p1\"\u003eThe MMX Underbody Oil Cooler Guard has been engineered to protect one of the BMW G8x platform’s most vulnerable areas from costly road and track damage. Manufactured from precision-folded 6061-T6 aluminium and finished in a durable black powder coat, the guard features an optimised hexagonal grille design to maximise airflow while shielding the exposed underbody radiator from debris and impacts. Designed as a direct OEM-fit solution, installation requires no cutting or drilling and includes all required mounting hardware.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003e\u003cem\u003eFurther information below.\u003c\/em\u003e\u003c\/strong\u003e\u003c\/p\u003e","brand":"MMX Performance","offers":[{"title":"Default","offer_id":55695102214520,"sku":"MMR13-1602","price":299.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0276\/7375\/5750\/files\/mmx-engine-oil-cooler-guard-bmw-g8x-m2-m3-m4-6561364.png?v=1791627231"},{"product_id":"mmx-s58-oil-change-service-kit-bmw-g8x-m2-m3-m4","title":"MMX S58 Oil Change Service Kit – BMW G8X M2, M3 \u0026 M4","description":"\u003cp\u003eMMX S58 Oil Change Service Kit – BMW G8X M2, M3 \u0026amp; M4\u003c\/p\u003e\u003cp class=\"p1\"\u003eThe MMX Performance Oil Change Service Kit for BMW S58 engines is a premium three-piece upgrade package designed to last the lifetime of your engine. By choosing this kit for your next oil service, you can drive with complete confidence, knowing these durable, reusable components eliminate common failure points and deliver long-term value.\u003c\/p\u003e\n\u003cp class=\"p1\"\u003eThis comprehensive kit combines three essential MMX S58 upgrades: a high-performance stainless steel lifetime oil filter, a precision-machined billet oil filter housing, and a magnetic sump plug to help capture harmful debris. Built for reliability, engineered for performance, and designed to pay for itself over time.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003e\u003cem\u003eFurther information below.\u003c\/em\u003e\u003c\/strong\u003e\u003c\/p\u003e","brand":"MMX Performance","offers":[{"title":"Default","offer_id":55695102247288,"sku":"MMR17-1600FK","price":213.6,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0276\/7375\/5750\/files\/mmx-s58-oil-change-service-kit-bmw-g8x-m2-m3-m4-9047524.png?v=1791627218"},{"product_id":"mmx-g8x-turbo-inlet-elbows-bmw-g8x-m2-m3-m4","title":"MMX G8X Turbo Inlet Elbows – BMW G8X M2, M3 \u0026 M4","description":"\u003cp\u003eMMX G8X Turbo Inlet Elbows – BMW G8X M2, M3 \u0026amp; M4\u003c\/p\u003e\u003cp class=\"p1\"\u003eWelcome to our high-flow Turbo Inlet elbows for the S58-powered G8x M2, M3, and M4. Built to improve airflow, throttle response, and overall turbo performance. We’ve crafted each inlet from mandrel-bent 6062-T6 aluminium in 70mm and 63mm sizes, using CNC machining, robotic TIG welding, and a proper velocity stack to keep airflow smooth and unrestricted. It fits perfectly with the stock intake pipes, our MMX Intake Pipe Set (MMR11-1601), or most aftermarket intake setups.\u003c\/p\u003e\n\u003cp class=\"p1\"\u003e\u003cstrong\u003ePlease note: These are not compatible with 2027+ model-year vehicles or Euro 7 vehicles.\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003e\u003cem\u003eFurther information below.\u003c\/em\u003e\u003c\/strong\u003e\u003c\/p\u003e","brand":"MMX Performance","offers":[{"title":"Default","offer_id":55695102280056,"sku":"MMR11-1600","price":359.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0276\/7375\/5750\/files\/mmx-g8x-turbo-inlet-elbows-bmw-g8x-m2-m3-m4-5068207.png?v=1791627223"},{"product_id":"mmx-g8x-intake-pipe-kit-bmw-g8x-m2-m3-m4","title":"MMX G8X Intake Pipe Kit – BMW G8X M2, M3 \u0026 M4","description":"\u003cp\u003eMMX G8X Intake Pipe Kit – BMW G8X M2, M3 \u0026amp; M4\u003c\/p\u003e\u003cp\u003eUnlock the full potential of your BMW M2, M3 and M4 with the MMX G8x intake pipe set, designed to deliver uninterrupted, high-velocity airflow straight to your OEM turbo inlets. Unlike the restrictive factory corrugated pipework, our constant-diameter aluminium design eliminates turbulence and ensures a smooth, unrestricted intake path for maximum efficiency.\u003c\/p\u003e\n\u003cp\u003eEngineered for seamless OEM fitment, our pipework integrates flawlessly with the stock airbox and turbo inlet system while removing the airflow bottlenecks at the turbo elbow joiners. Experience sharper throttle response, improved turbo efficiency, and a refined induction sound—all with a simple, high-quality bolt-on solution.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003e\u003cem\u003eFurther information below.\u003c\/em\u003e\u003c\/strong\u003e\u003c\/p\u003e","brand":"MMX Performance","offers":[{"title":"Default","offer_id":55695102312824,"sku":"MMR11-1601","price":479.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0276\/7375\/5750\/files\/mmx-g8x-intake-pipe-kit-bmw-g8x-m2-m3-m4-6835643.png?v=1791627217"},{"product_id":"mmx-front-control-arm-spherical-bushings-bmw-g8x-m2-m3-m4","title":"MMX Front Control Arm Spherical Bushings – BMW G8X M2, M3 \u0026 M4","description":"\u003cp\u003eMMX Front Control Arm Spherical Bushings – BMW G8X M2, M3 \u0026amp; M4\u003c\/p\u003e\u003cp class=\"p1\"\u003eUpgrade your G8x M2, M3 and M4 BMW with MMX Front Control Arm Spherical Bushings for sharper handling and improved stability. Designed to maintain alignment under hard braking and cornering, they directly replace the soft OEM rubber bushings that quickly wear, delivering precise steering response and lasting performance on road or track.\u003c\/p\u003e\n\u003cp class=\"p1\"\u003eSold in pairs.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003e\u003cem\u003eFurther information below.\u003c\/em\u003e\u003c\/strong\u003e\u003c\/p\u003e","brand":"MMX Performance","offers":[{"title":"Default","offer_id":55695102345592,"sku":"MMR45-1601","price":299.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0276\/7375\/5750\/files\/mmx-front-control-arm-spherical-bushings-bmw-g8x-m2-m3-m4-2180998.png?v=1791627228"},{"product_id":"mmx-front-wheel-arch-clearance-kit-bmw-g8x-m2-m3-m4","title":"MMX Front Wheel Arch Clearance Kit – BMW G8X M2, M3 \u0026 M4","description":"\u003cp\u003eMMX Front Wheel Arch Clearance Kit – BMW G8X M2, M3 \u0026amp; M4\u003c\/p\u003e\u003cp\u003e\u003cspan\u003eMMX Performance's replacement aluminium grilles offer extra clearance for modified G8x BMWs with lowered suspension, wider tyres, or wheel spacers. Designed to maintain airflow and protect against debris, the grilles feature a durable black powder coat and laser-cut hexagonal design. They securely attach with four fixings per side. Note: Cutting and removing the original vented section from the OE arch liner is required for fitting. The kit includes all fixtures and fittings.\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003e\u003cem\u003eFurther information below.\u003c\/em\u003e\u003c\/strong\u003e\u003c\/p\u003e","brand":"MMX Performance","offers":[{"title":"Default","offer_id":55695102378360,"sku":"MMR45-1602","price":179.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0276\/7375\/5750\/files\/mmx-front-wheel-arch-clearance-kit-bmw-g8x-m2-m3-m4-2505767.png?v=1791627221"},{"product_id":"mmx-rp650-front-brake-pads-bmw-g8x-m2-m3-m4","title":"MMX RP650 Front Brake Pads – BMW G8X M2, M3 \u0026 M4","description":"\u003cp\u003eMMX RP650 Front Brake Pads – BMW G8X M2, M3 \u0026amp; M4\u003c\/p\u003e\u003cp\u003e\u003cspan\u003eWhen it comes to high-performance driving, we all know that braking performance is just as important as acceleration and cornering. So, to gain performance from your factory BMW G8x M2, M3, or M4's brakes, our RP650 front brake pads are an essential upgrade.\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003e\u003cem\u003eFurther information below.\u003c\/em\u003e\u003c\/strong\u003e\u003c\/p\u003e","brand":"MMX Performance","offers":[{"title":"Default","offer_id":55695102411128,"sku":"MMR27-1601-F","price":347.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0276\/7375\/5750\/files\/mmx-rp650-front-brake-pads-bmw-g8x-m2-m3-m4-2651302.png?v=1791627220"},{"product_id":"mmx-rp650-rear-brake-pads-bmw-g8x-m2-m3-m4","title":"MMX RP650 Rear Brake Pads – BMW G8X M2, M3 \u0026 M4","description":"\u003cp\u003eMMX RP650 Rear Brake Pads – BMW G8X M2, M3 \u0026amp; M4\u003c\/p\u003e\u003cp\u003e\u003cspan\u003eWhen it comes to high-performance driving, we all know that braking performance is just as important as acceleration and cornering. So, to gain performance from your factory BMW G8x M2, M3, or M4's brakes, our RP650 rear brake pads are an essential upgrade.\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003e\u003cem\u003eFurther information below.\u003c\/em\u003e\u003c\/strong\u003e\u003c\/p\u003e","brand":"MMX Performance","offers":[{"title":"Default","offer_id":55695102443896,"sku":"MMR27-1602-R","price":253.25,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0276\/7375\/5750\/files\/mmx-rp650-rear-brake-pads-bmw-g8x-m2-m3-m4-2842701.png?v=1791627219"},{"product_id":"mmx-380mm-front-2-piece-brake-discs-bmw-g8x-m2-m3-m4","title":"MMX 380mm Front 2-Piece Brake Discs – BMW G8X M2, M3 \u0026 M4","description":"\u003cp\u003eMMX 380mm Front 2-Piece Brake Discs – BMW G8X M2, M3 \u0026amp; M4\u003c\/p\u003e\u003cp\u003eMMR Performance front disc\/rotor upgrades are designed to directly replace your OEM brake discs\/rotors and come as a pair complete with left and right-handed, two-piece floating discs. Each disc not only weighs less than the OEM part but also features much larger, more efficient directional cooling vanes to ensure even braking performance, pad wear and cooling capability.\u003c\/p\u003e\n\u003cp\u003eLeft and right handed 380mm x 36mm discs sold in a pair. Matching 2-piece rear discs available.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003c!----\u003e\u003cp\u003e\u003cstrong\u003e\u003cem\u003eFurther information below.\u003c\/em\u003e\u003c\/strong\u003e\u003c\/p\u003e","brand":"MMX Performance","offers":[{"title":"Default","offer_id":55695102476664,"sku":"MMR30-1601F","price":1318.8,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0276\/7375\/5750\/files\/mmx-380mm-front-2-piece-brake-discs-bmw-g8x-m2-m3-m4-3798153.png?v=1791627218"},{"product_id":"mmx-370mm-rear-2-piece-brake-discs-bmw-g8x-m2-m3-m4","title":"MMX 370mm Rear 2-Piece Brake Discs – BMW G8X M2, M3 \u0026 M4","description":"\u003cp\u003eMMX 370mm Rear 2-Piece Brake Discs – BMW G8X M2, M3 \u0026amp; M4\u003c\/p\u003e\u003cp\u003eMMR Performance disc\/rotor upgrades are designed to directly replace your OEM brake discs\/rotors and come as a pair complete with left and right-handed, two-piece floating discs. Each disc not only weighs less than the OEM part but also features much larger, more efficient directional cooling vanes to ensure even braking performance, pad wear and cooling capability.\u003c\/p\u003e\n\u003cp\u003eLeft and right handed 370mm x 24mm discs sold in a pair. Matching 2-piece front discs available.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003c!----\u003e\u003cp\u003e\u003cstrong\u003e\u003cem\u003eFurther information below.\u003c\/em\u003e\u003c\/strong\u003e\u003c\/p\u003e","brand":"MMX Performance","offers":[{"title":"Default","offer_id":55695102509432,"sku":"MMR30-1602R","price":1198.8,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0276\/7375\/5750\/files\/mmx-370mm-rear-2-piece-brake-discs-bmw-g8x-m2-m3-m4-6060793.png?v=1791627219"},{"product_id":"mmx-s58-cotton-panel-air-filter-bmw-g8x-m2-m3-m4","title":"MMX S58 Cotton Panel Air Filter – BMW G8X M2, M3 \u0026 M4","description":"\u003cp\u003eMMX S58 Cotton Panel Air Filter – BMW G8X M2, M3 \u0026amp; M4\u003c\/p\u003e\u003cp\u003eLooking for a simple, warranty-friendly upgrade for your G-Series M-Car? One of the easiest ways to upgrade the breathing abilities of your S58-engined M2, M3 or M4 is with our pair of replacement performance panel air filters.\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eFitting is very straightforward and installed in around 10 minutes, and easily returned to standard, should you ever wish. Not to mention, completely washable and reusable.\u003c\/span\u003e\u003c\/p\u003e\n\u003c!----\u003e\u003cp\u003e\u003cstrong\u003e\u003cem\u003eFurther information below.\u003c\/em\u003e\u003c\/strong\u003e\u003c\/p\u003e","brand":"MMX Performance","offers":[{"title":"Default","offer_id":55695102542200,"sku":"MMR01-1601","price":157.25,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0276\/7375\/5750\/files\/mmx-s58-cotton-panel-air-filter-bmw-g8x-m2-m3-m4-5161949.png?v=1791627218"},{"product_id":"mmx-lifetime-oil-filter-bmw-s58","title":"MMX Lifetime Oil Filter – BMW S58","description":"\u003cp\u003eMMX Lifetime Oil Filter – BMW S58\u003c\/p\u003e\u003cp class=\"MsoNormal\"\u003eOur oil filter element is made from a pleated high-flow stainless steel micronic filter cloth – a medical grade material guaranteed to filter out oil contamination right down to 20 Microns, ensuring far better protection than paper-based filters can achieve.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eAs well as this exceptional filtration, the filter material allows for five times the flow of comparable paper oil filters. Its design provides consistent filtering across entire filter surface.\u003c\/p\u003e\n\u003c!----\u003e\u003cp\u003e\u003cstrong\u003e\u003cem\u003eFurther information below.\u003c\/em\u003e\u003c\/strong\u003e\u003c\/p\u003e","brand":"MMX Performance","offers":[{"title":"Default","offer_id":55695102574968,"sku":"MMR17-1602","price":62.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0276\/7375\/5750\/files\/mmx-lifetime-oil-filter-bmw-s58-9373788.png?v=1791627215"},{"product_id":"mmx-height-adjustable-lowering-springs-bmw-g8x-m2-m3-m4","title":"MMX Height Adjustable Lowering Springs – BMW G8X M2, M3 \u0026 M4","description":"\u003cp\u003eMMX Height Adjustable Lowering Springs – BMW G8X M2, M3 \u0026amp; M4\u003c\/p\u003e\u003cp data-mce-fragment=\"1\"\u003eUnlike conventional lowering springs, the MMR Height adjustable springs (HAS) for the current G80 M3, G82 M4 and G87 M2 gives you a fully customisable ride height adjustment. So, however you want your car to sit, our kit allows you to infinitely fine tune heights front and rear until you reach your ideal stance.\u003c\/p\u003e\n\u003c!----\u003e\u003cp\u003e\u003cstrong\u003e\u003cem\u003eFurther information below.\u003c\/em\u003e\u003c\/strong\u003e\u003c\/p\u003e","brand":"MMX Performance","offers":[{"title":"Default","offer_id":55695102607736,"sku":"MMR08-1603","price":887.03,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0276\/7375\/5750\/files\/mmx-height-adjustable-lowering-springs-bmw-g8x-m2-m3-m4-2245751.png?v=1791627215"}],"url":"https:\/\/clubsportgarage.co.uk\/collections\/bmw-g83-m4.oembed","provider":"Clubsport Garage","version":"1.0","type":"link"}